======================================================================================
======================================================================================

  ---------------------------
  Verilog-A definition of PSP
  ---------------------------


  (c) Copyright notice

  Since 2012 until today, PSP has been co-developed by NXP Semiconductors and
  Delft University of Technology. For this part of the model, each claim undivided
  ownership and copyrights
  Until and including 2011, PSP has been co-developed by NXP Semiconductors and
  Arizona State University. For this part of the model, NXP Semiconductors claims
  undivided ownership and copyrights.


  Version: PSP 103.2.0 (including JUNCAP2 200.4.0), December 2012

  This version of PSP will be part of SiMKit 4.0.1
  
======================================================================================
======================================================================================

  Authors: G.D.J. Smit, A.J. Scholten, and D.B.M. Klaassen (NXP Semiconductors)
           R. van der Toorn (Delft University of Technology)

  Former contributers:
           G. Gildenblat, W. Yao, Z. Zhu, X. Li and W. Wu (Arizona State University)
           R. van Langevelde (Philips Research)

  The most recent version of the model code, the documentation, and contact
  information can be found on:

       http://psp.ewi.tudelft.nl/
       
======================================================================================
======================================================================================

This package consists of the following files:

     - releasenotesPSP103.txt         This file

     - psp103.va                      Main file for PSP model
     - psp103t.va                     Main file for PSP model with self heating
     - psp103_nqs.va                  Main file for PSP model with NQS-effects
     - juncap200.va                   Main file for JUNCAP2 stand-alone model

     - Common103_macrodefs.include    Common macro definitions
     - PSP103_macrodefs.include       Macro definitions for PSP
     - PSP103_module.include          Actual model code for intrinsic MOS model
     - PSP103_SPCalculation.include   Surface potential and related calculations
     - PSP103_binning.include         Geometry scaling equation for binning
     - PSP103_binpars.include         Parameterlist for global PSP binning model
     - PSP103_nqs_macrodefs.include   Macro definitions for PSP-NQS
     - PSP103_InitNQS.include         PSP-NQS initialization code
     - PSP103_ChargesNQS.include      Calculation of NQS-charge contributions
     - JUNCAP200_macrodefs.include    Macro definitions for JUNCAP2 model
     - JUNCAP200_parlist.include      JUNCAP2 parameter list
     - JUNCAP200_varlist1.include     JUNCAP2 variable declarations
     - JUNCAP200_varlist2.include     JUNCAP2 variable declarations
     - JUNCAP200_InitModel.include    JUNCAP2 model initialization code

======================================================================================
======================================================================================

Usage
-----

Depending which model one wants to use, one should compile one of the four .va-files
(psp103.va, psp103t.va, psp103_nqs.va, and juncap200.va). The module names are
"PSP103VA", "PSP103TVA", and "PSPNQS103VA" (for QS, self heating, and NQS,
respectively), and "JUNCAP200" for the JUNCAP2-model.


======================================================================================
======================================================================================

Release notes vA-code of PSP 103.2.0 (December 2012)
----------------------------------------------------

Changes:

- PSP103 with self heating is now available. This module (PSP103TVA) has an
  additional temperature terminal dt, thermal resistance RTH and thermal capacitance
  CTH. Geometry scaling rules for RTH and CTH, as well as temperature dependence of
  RTH is also provided.
- The implementation of the thermal noise model has been improved:
    * a bug in the sign of the correlation coefficient for negative Vds was solved
    * Gummel symmetry of Sid at very high frequency was improved
    * number of white_noise sources was reduced and noise voltage values in noise-
      subcircuit where scaled to more physical values (no consequences for simulation
      results).
- The calculation of the surface potential in the gate-diffusion overlap region was
  simplified to improve simulation speed of verilog-A code.
- The calculation of the gate-tunneling current in the gate-diffusion overlap region
  was simplified to improve simulation speed of verilog-A code.
- The expression for qlim2 in QM correction was modified to avoid unphysical behavior
  when oxide thickness is large. This modification is relevant for high-k dielectrics.
- Some minor bugs in the calculation of OP-output variables were solved.
- Some minor implementation changes.
- Some OP-output variables was added.

PSP 103.2.0 is backwards compatible with the previous version, PSP 103.1.2.

======================================================================================
======================================================================================

The authors want to thank Laurent Lemaitre and Colin McAndrew (Freescale)
for their help with ADMS and the implementation of the model code. Geoffrey
Coram (Analog Devices) is acknowledged for input concerning the Verilog-A
implementation of the model.
