Univ. Grenoble Alpes, CEA, LETI, DTBS, 17 rue des Martyrs, Grenoble, France

Deterministic lateral displacement (DLD) devices enable to separate nanometer to micrometer-sized particles around a cutoff diameter, during their transport through a microfluidic channel with slanted rows of pillars. In order to design appropriate DLD geometries for specific separation sizes, robust models are required to anticipate the value of the cutoff diameter. So far, the proposed models result in a single cutoff diameter for a given DLD geometry. This paper shows that the cutoff diameter actually varies along the DLD channel, especially in narrow pillar arrays. Experimental and numerical results reveal that the variation of the cutoff diameter is induced by boundary effects at the channel side walls, called the wall effect. The wall effect generates unexpected particle trajectories that may compromise the separation efficiency. In order to anticipate the wall effect when designing DLD devices, a predictive model is proposed in this work and has been validated experimentally. In addition to the usual geometrical parameters, a new parameter, the number of pillars in the channel cross dimension, is considered in this model to investigate its influence on the particle trajectories. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

deterministic lateral displacement, intermediary trajectory, multiple critical diameters, nanometer and micrometer-sized particle separation, numerical model

Fluidic devices, Geometry, Microfluidics, Micrometers, Numerical models, Particle separators, Trajectories, Critical diameter, Lateral displacements, Micro-fluidic devices, Microfluidic channel, Micrometer sized particles, Particle trajectories, Predictive modeling, Separation efficiency, Separation