You are here : Home > PsD-DRT-13-0085

Postdocs

PsD-DRT-13-0085

Published on 7 December 2023
PsD-DRT-13-0085
Research FieldElectronics and microelectronics - Optoelectronics

Domaine-SMaterials and applications

ThemeEngineering sciences

Theme-SEngineering sciences

Domaine
Electronics and microelectronics - Optoelectronics Engineering sciences Materials and applications Engineering sciences DRT DCOS SCCS LCEF Grenoble
Title
Aging study of silicon nanowires used as piezoresistive detection gauges for achieving inertial MEMS sensors.
Abstract
Today’s sensors are present in all areas: housing, automotive... Thanks to recent developments in microelectronics, new generations of sensors combine high performance, small size and low cost. In this context, CEA-LETI has proposed an innovative concept called M&NEMS for the realization of inertial sensors such as accelerometers, magnetometers and gyroscopes. The M&Nems concept combines MEMS and NEMS to take advantage of the great inertia generated by a MEMS mass and the high detection sensitivity of piezoresistive silicon nanowires. Demonstrators have already been carried out and have shown the good potential of the M&Nems concept. One of the main challenges which remain to overcome is the reliability of sensors based on this concept and specifically the reliability of the piezoresistive nanowires. The research work will be mainly focused on the study of the failure modes of these piezoresistive nanowires gauges i.e. the identification of physical phenomena and the development of failure models. In order to do this study, a first preliminary work will be focused on the physical mechanisms which manage the electrical conduction in the nanowires: piezoresistivity, charge trapping, relaxation field effect ... The work will then continue by the study of the failure modes of nanowires, the goal will be to understand and model the physical aging of these nanowires: it will be possible to rely on the knowledge of the physics of nanowires conduction but also play with the physical parameters of these nanowires such as silicon doping, the process fabrication, the packaging technique, the thermomechanical stresses, the scale effect due to surface / volume ratio, or the surface condition. Finally, models of aging will allow proposing and validating technological choices to ensure the nanowires lifetime depending on operating conditions of the sensors.
Location
Département Composants Silicium (LETI) Service Caractérisation, Conception et Simulation Laboratoire Caractérisation Electrique et Fiabilité
Pcontact
SOUCHON Frédéric CEA DRT/DIHS CEA-LETI Minatec / DIHS / LCFM 17 avenue des Martyrs - 38054 Grenoble Cedex 9 0438782868
Start date1/9/2013
Contact personf.souchon@cea.fr

Retour à la liste